1 x D Next-Generation Battery Eliminator Kit

Description

NEW & IMPROVED NEXT-GENERATION DESIGN! This is the finest 1 x D Next-Generation Battery Eliminator Kit on the market capable of powering virtually every electronic device that uses 1 x D battery! This new and improved Next-Generation 1 x D Battery Eliminator Kit is the ultimate solution to replacing expensive D batteries in your electronic devices that are heavily used or left on for extended periods of time. This kit includes 1 x D Next-Generation Active Dummy Cell Battery, and an AC to DC Wall Power Adapter. These 2 components easily and neatly plug into each other for a complete "plug-and-play" battery eliminator solution, so stop changing out dead batteries and start saving money! Since the AC to DC Wall Power Adapter included with this kit can supply up to 1-Amp of current, it can supply power for the most demanding electronic devices such as wall clocks, automatic soap dispensers, touchless paper towel dispensers, automatic pet feeders. pulse igniters for tankless water heaters, electronic spark igniters for gas cooktops & ovens, etc.

This new and improved Next-Generation 1 x D Battery Eliminator Kit has a single-component Next-Generation D Active Dummy Cell Battery that more closely resembles an actual D battery in construction and terminal conductive surfaces. This new single-component design eliminates the need for a 2-component Active Dummy Cell Battery constructed of a AA Active Dummy Cell Battery inserted into a AA to D converter shell which was used in the original first-generation 1 x D Battery Eliminator Kit. This new single-component design eliminates the AA Active Dummy Cell Battery falling out of the AA to D converter shell, and the small and unreliable contact surface areas! No more worrying about the positive terminals of the AA Dummy Cell Battery making good contact with the internal positive terminal of the AA to D converter shell. No more wondering if the positive and negative terminals are making good contact with the terminals in the battery compartment! These new features mean less hassle, more reliable terminal connections, and an overall superior solution!

The Next-Generation D Active Dummy Cell Battery included in this kit is the same size as a regular D battery, so it easily fits into the electronic device's battery compartment space. Please observe the correct polarity just as you would when inserting a real battery. The thin flat flexible cable (FFC cable) coming out of the Next-Generation D Active Dummy Cell Battery can easily be run around the side of most battery compartment covers, so the original battery compartment cover can still be used. In some cases, it might be necessary to take a small file and file out a shallow groove in the battery compartment cover to give the FFC cable more room to run around the side of the cover.

The AC to DC Wall Power Adapter included in this kit is designed for use with the included Next-Generation D Active Dummy Cell Battery. The AC to DC Wall Power Adapter plugs into a standard wall outlet and converts the 120VAC coming from the wall outlet into an output voltage ranging from 1.0VDC to 1.5VDC which is the voltage required to power electronic devices that use 1 x D battery. Since this AC to DC Wall Power Adapter can supply up to 1-Amp of output current, it can power virtually any electronic device on the market that uses 1 x D battery including wall clocks, automatic soap dispensers, touchless paper towel dispensers, automatic pet feeders. pulse igniters for tankless water heaters, electronic spark igniters for gas cooktops & ovens, etc. The Next-Generation D Active Dummy Cell Battery FFC cable and AC to DC Wall Power Adapter cable can easily be hidden behind furniture, plants and under table cloths, rugs, decorative snow, etc.

Don't forget to check out our Battery Eliminator Accessories such as Power Extension Cables, Power Splitter Cables, additional Active Dummy Cell Batteries, and additional AC to DC Wall Power Adapters.

NOTE: The included AC to DC Wall Adapter supplies an output voltage of 1.0VDC to 1.5VDC which is within the acceptable range required by electronic devices that use 1 x D battery. A new D battery supplies 1.5VDC and gradually decreases over time to its end-of-life voltage which is generally considered to be 0.8VDC. As the D battery slowly dies over time and approaches this end-of-life voltage, electronic devices will start behaving erratically and may run slower and/or dimmer. Since the included AC to DC Wall Power Adapter supplies a voltage greater than this end-of-life voltage of 0.,8VDC, your electronic devices will always be operational without the worry of erratic device operation due to a dead or dying D battery.

NOTE: The Next-Generation D Active Dummy Cell Battery is not a real battery and will not power an electronic device on its own. It needs to be used in conjunction with the included AC to DC Wall Power Adapter as discussed above and illustrated in the pictures and diagrams.

IMPORTANT NOTES:

· The included AC to DC Wall Power Adapter converts 120VAC coming from a standard wall outlet to the voltage produced by a single D cell battery (0.8VDC to 1.5VDC). This conversion process results in the generation of some electrical noise which may interfere with the proper operation of certain types of sensitive electronic devices such as detection and measurement devices and motion sensors. If your electronic device operates erratically after replacing the D battery with this Next-Generation 1 x D Battery Eliminator Kit, then the electrical noise generated by the AC to DC Wall Power Adapter is most likely interfering with the proper operation of your electronic device, and this kit will not work, and you will need to continue to power your device with a regular D battery. We apologize for this inconvenience, and you can return the kit for a full refund.

· The included AC to DC Wall Power Adapter converts the 120VAC coming from the wall outlet into a voltage ranging from 1.0VDC to 1.5VDC which is what’s needed to supply power to electronic devices that use 1 x D battery. A fresh regular alkaline D battery supplies about 1.5VDC and has an end-of-life voltage of 0.8VDC, so the voltage supplied by this power adapter is within the range required by electronic devices that operate on a single D alkaline battery. The power adapter is supplying the same power as these single D batteries, and your electronic devices won’t know the difference. Our power adapters can power more than one electronic device, so if you need to power multiple electronic devices from a single AC to DC wall power adapter, simply purchase the necessary active dummy cell batteries, power splitter cables, and power extension cables. 1 x D Active Dummy Cell Battery is needed for each electronic device you wish to power. This AC to DC Wall Power Adapter will not work with electronic devices that use more than 1 D alkaline battery.

· The output voltage provided by the included AC to DC Wall Power Adapter is typically 1.5VDC at no output current (0-Amps) and decreases as the output current increases. Please refer to the “Output Voltage Regulation” values in the “Specifications” table below and the graph of the “Typical Output Voltage vs Output Current” in the pictures. The end-of-life voltage for a single D alkaline battery is about 0.8V, and this AC to DC Wall Power Adapter can maintain an output voltage of between 1.0VDC and 1.5VDC while providing up to 1-Amp of output current. This voltage range is sufficient to power devices that operate on a single D alkaline battery.

IF YOU HAVE ANY QUESTIONS OR NEED TECHNICAL SUPPORT TO DETERMINE WHICH BATTERY ELIMINATOR KIT, REPLACEMENT PARTS OR ACCESSORIES YOU NEED, PLEASE DON'T HESITATE TO CALL OR E-MAIL US AT [email protected].

Applications

· Wall Clocks & Portable Travel Clocks

· Small Area Lights & Lanterns

· Automatic Soap Dispensers

· Touchless Paper Towel Dispensers

· Automatic Pet & Fish Feeders

· Pulse Igniters for Tankless Water Heaters

· Electronic Spark Igniters for Gas Cooktops & Ovens

Features

· Can Be Used to Eliminate 1 x D Battery in Virtually any Electronic Device That Uses 1 x D Battery

· Easy to Use "Plug-and-Play" Kit

· New and Improved Single-Component Next-Generation D Active Dummy Cell Battery More Closely Resembles a Real D Battery Resulting in Higher Reliability and Better Contact with Terminals in Battery Compartments

· Perfect For Electronic Devices That Are Heavily Used and Left on For Extended Periods of Time

· Kit Includes 1 x Next-Generation D Active Dummy Cell Battery, and a 120VAC to 1.5VDC AC to DC Wall Power Adapter

· 120VAC to 1.5VDC AC to DC Wall Power Adapter Can Provide Up to 1-Amp of Output Current.

· Thin Flat Flexible Cable (FFC Cable) Coming Out of Next-Generation D Active Dummy Cell Battery Easily Runs Around Battery Compartment Cover and Under Electronic Device Without Causing it to Tilt or Not Sit Flat

· Power Cables Can Easily Be Hidden Behind Furniture & Plants, Under Rugs & Table Cloths, Around Plants & Other Objects, Under Decorative Snow, Etc.

· Works With Our Battery Eliminator Kit Accessories Such as Power Extension Cables and Power Splitter Cables

· FFC Cable Coming Out of Next-Generation D Active Dummy Cell Battery Has 5.5mm x 2.1mm Female Barrel Socket at End That Mates with 5.5mm x 2.1mm Male Barrel Plug at End of AC to DC Wall Power Adapter Cable

Specifications