AC to DC Wall Power Adapter - MEDIUM-DUTY 30-WATTS OUTPUT - 100VAC-240VAC to Adjustable Output Voltage (3VDC-12VDC) & USB [email protected] - Interchangeable Tips - Works with Battery Eliminator Kits

Description

MEDIUM-DUTY (30-WATTS MAX TOTAL OUTPUT POWER)

Designed for use with our battery eliminator kits for electronic devices that use 2 through 8 alkaline batteries (AAA, AA, C, D) or a single 9V alkaline battery. This medium-duty 30-Watts max total output power AC to DC wall power adapter plugs into a standard wall outlet and converts 100VAC-240VAC to an adjustable output voltage of 3VDC, 4.5VDC, 5.0VDC, 6VDC, 7.5VDC, 9.0VDC and 12VDC@2A max. It also has a fixed USB output voltage of [email protected] for powering or charging a variety electronic devices. Comes with a 3.3-ft (1m) long power cable with a variety of standard interchangeable connectors at the end. The output voltage can be adjusted with the included key or a small screwdriver by rotating the red selector knob, on the adapter's housing, to the desired output voltage.

Since this medium-duty output AC to DC wall power adapter can supply up to 30-Watts max total output power, you can power more than just a single electronic device by purchasing additional active and passive dummy cell batteries and our optional power splitter cables (available in 2-way up through 8-way). We also sell optional power extension cables when additional cable length is required.

IMPORTANT NOTES: This AC to DC Wall Power Adapter Converts the 120VAC coming from the wall outlet into a selectable output voltage to power your flameless LED candles and other electronic devices that use anywhere from 2 to 8 alkaline batteries or a single 9V alkaline battery. A regular alkaline battery supplies about 1.5VDC, so 2 batteries supply about 3.0VDC, 3 batteries supply about 4.5VDC, 4 batteries supply 6.0VDC, 5 batteries supply 7.5VDC, 6 batteries supply 9.0VDC, and 8 batteries supply 12.0VDC. Of course, a single 9V alkaline battery supplies 9.0VDC. There is also a fixed USB output voltage of 5.0VDC available through a USB Type-A female socket to power or charge electronic devices that are normally powered or charged through a USB output port. This power adapter can usually power more than one electronic device, so if you need to power multiple electronic devices from a single AC to DC wall power adapter, simply purchase the necessary active and passive dummy cell batteries, power splitter cables, and power extension cables. The output voltage can be adjusted with the included key or a small screwdriver by rotating the red selector knob, on the adapter's housing, to the desired output voltage.

Features

· Supplies up to 30-Watts max Total Output Power for Medium-Duty Loads

· Designed For Use with Our Battery Eliminator Kits That Use 2 Through 8 Alkaline Batteries (AAA, AA, C, D) or a single 9V Alkaline Battery

· AC to DC Wall Power Adapter Converts 100VAC-240VAC to 3.0VDC, 4.5VDC. 5.0VDC, 6.0VDC, 7.5VDC, 9VDC, 12VDC@2A for Medium-Duty Loads

· Supplies a Fixed [email protected] USB Output Voltage Through a USB Type-A Female Socket for Powering or Charging Electronic Devices That are Typically Charged or Powered Through a USB Port

· Voltage Adjustable via Included Key or Small Screwdriver by Rotating Red Selector Knob to Desired Output Voltage

· 3.3-ft (1m) Long Power Cable

· 8 x Interchangeable Connector Adapters Included for Powering Electronic Devices with a Variety of Different Types of Standard Connectors – 5.5mm x 2.1mm Male Barrel Plug, 5.5mm x 2.5mm Male Barrel Plug, 4.0mm x 1.7mm Male Barrel Plug, 3.5mm x 1.35mm Male Barrel Plug, 3.0mm x 1.1mm Male Barrel Plug, 2.5mm x 0.7mm Male Barrel Plug, 2 x Screw Terminals for Adapting to Bare Wires, Micro-USB Male Plug

· Will Power 1 or More Electronic Devices That Use 2 Through 8 Alkaline Batteries (AAA, AA, C, D) or a single 9V Alkaline Battery

· Works With Our Power Splitter Cables and Power Extension Cables (Mates With 5.5mm x 2.1mm Barrel Socket)

· Works With Our AAA, AA, C, D and 9V Active Dummy Cell Batteries (Mates With 5.5mm x 2.1mm Barrel Socket)

Specifications